Adjustable male stud elbow, G 1-1/4", tube 30 S, zinc-plated steel, no nut or ring

This adjustable male stud elbow leads a precision tube out of a parallel G thread at a right angle and holds it with a cutting ring. The data sheet gives a working pressure of 400 bar. The stated material is zinc-plated steel. This version is supplied with heavy series and scope of delivery without nut and cutting ring.

Benefits

• The elbow can be set and is then counter-locked, so tube 30 S (M42x2) stays free of stress.
• Parallel male stud thread G 1-1/4" with an elastomer seal, so the stud end seals without hemp or adhesive.
• Working pressure up to 400 bar in the heavy series.
• Temperature range -35 to +100 °C, limited by the elastomer seal at the body in zinc-plated steel.
• Tube connection 30 S (M42x2) through a cutting ring, held by both form and friction.

Applications

At a cylinder port with thread G 1-1/4" the elbow leads tube 30 S (M42x2) to the side at once and saves space.

Standards and conformity

The stated temperature range -35 to +100 °C applies to the version in zinc-plated steel. An elastomer seal narrows it.