Adjustable male stud elbow, G 1-1/2", tube 38 S, stainless steel 1.4571

Once installed, the adjustable male stud elbow leads a precision tube out of a parallel G thread at a right angle and holds it with a cutting ring. It is produced from stainless steel 1.4571. The data give male stud thread G 1-1/2" and tube connection 38 S (M52x2). In addition the data give heavy series.

Benefits

• The elbow can be set and is then counter-locked, so tube 38 S (M52x2) stays free of stress.
• Parallel male stud thread G 1-1/2" with an elastomer seal, so the stud end seals without hemp or adhesive.
• Working pressure up to 315 bar in the heavy series.
• Temperature range -20 to +200 °C, limited by the elastomer seal at the body in stainless steel 1.4571.
• Tube connection 38 S (M52x2) through a cutting ring, held by both form and friction.

Applications

For maintenance on a line of the heavy series only the union nut is undone and the stud thread stays in place.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.