Adjustable male stud elbow, G 1/4", tube 6 S, zinc-plated steel, no nut or ring

In use, the adjustable male stud elbow leads a precision tube out of a parallel G thread at a right angle and holds it with a cutting ring. It is supplied with male stud thread G 1/4" and tube connection 6 S (M14x1.5). It is produced from zinc-plated steel. In addition the data give heavy series and scope of delivery without nut and cutting ring.

Benefits

• The elbow can be set and is then counter-locked, so tube 6 S (M14x1,5) stays free of stress.
• Parallel male stud thread G 1/4" with an elastomer seal, so the stud end seals without hemp or adhesive.
• Working pressure up to 630 bar in the heavy series.
• Temperature range -35 to +100 °C, limited by the elastomer seal at the body in zinc-plated steel.
• Tube connection 6 S (M14x1,5) through a cutting ring, held by both form and friction.

Applications

At a cylinder port with thread G 1/4" the elbow leads tube 6 S (M14x1,5) to the side at once and saves space.

Standards and conformity

The stated temperature range -35 to +100 °C applies to the version in zinc-plated steel. An elastomer seal narrows it.