Adjustable male stud elbow, G 1/8", tube 6 L, stainless steel 1.4571, no nut or ring

This adjustable male stud elbow leads a precision tube out of a parallel G thread at a right angle and holds it with a cutting ring. The data sheet gives a working pressure of 315 bar. The stated material is stainless steel 1.4571. This version is supplied with light series and scope of delivery without nut and cutting ring.

Benefits

• The elbow can be set and is then counter-locked, so tube 6 L (M12x1,5) stays free of stress.
• Parallel male stud thread G 1/8" with an elastomer seal, so the stud end seals without hemp or adhesive.
• Working pressure up to 315 bar in the light series.
• Temperature range -20 to +200 °C, limited by the elastomer seal at the body in stainless steel 1.4571.
• Tube connection 6 L (M12x1,5) through a cutting ring, held by both form and friction.

Applications

At a cylinder port with thread G 1/8" the elbow leads tube 6 L (M12x1,5) to the side at once and saves space.

Standards and conformity

The stated temperature range -20 to +200 °C applies to the version in stainless steel 1.4571. An elastomer seal narrows it.