Adjustable male stud elbow, G 3/8", tube 12 S, stainless steel 1.4571

As a adjustable male stud elbow the article leads a precision tube out of a parallel G thread at a right angle and holds it with a cutting ring. The data sheet gives a working pressure of 630 bar. This version is listed with male stud thread G 3/8" and tube connection 12 S (M20x1.5). Material stainless steel 1.4571 is listed for this version. Also stated are heavy series.

Benefits

• The elbow can be set and is then counter-locked, so tube 12 S (M20x1,5) stays free of stress.
• Parallel male stud thread G 3/8" with an elastomer seal, so the stud end seals without hemp or adhesive.
• Working pressure up to 630 bar in the heavy series.
• Temperature range -20 to +200 °C, limited by the elastomer seal at the body in stainless steel 1.4571.
• Tube connection 12 S (M20x1,5) through a cutting ring, held by both form and friction.

Applications

At a cylinder port with thread G 3/8" the elbow leads tube 12 S (M20x1,5) to the side at once and saves space.

Standards and conformity

The stated temperature range -20 to +200 °C applies to the version in stainless steel 1.4571. An elastomer seal narrows it.