Adjustable 45° connector, tube 20 S, stainless steel 1.4571, with sealing cone and O-ring

Once installed, the adjustable 45° connector turns a precision tube through 45 degrees and joins it to a tube stud with a sealing cone and an O-ring. This version comes with tube stud 20 S and tube connection 20 S (M30x2). It is complemented by a temperature range of -20 to +200 °C. Also stated are heavy series.

Benefits

• The 45 degree turn carries tube 20 S (M30x2) on even where a right angle would need too much room.
• The bend can be set to any direction before it is locked and is counter-locked afterwards.
• Sealing cone with an O-ring at tube stud 20 S for a soft joint that can be undone repeatedly.
• Working pressure up to 400 bar in the heavy series.
• Temperature range -20 to +200 °C for the body in stainless steel 1.4571.

Applications

At a tube stud 20 S in stainless steel 1.4571 the coupling replaces two bends and holds 400 bar.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.