5/3-way solenoid valve, closed centre, G 3/8, 1600 l/min, 12 V DC - YPC SF5303

In its spring-centred middle position the YPC SF5303 blocks all ports. The cylinder stops with air trapped on both sides, so a stroke can be halted at any point. Two coils select the outer positions, with 1600 l/min through G 3/8. At 12 V DC and 2.1 W the valve fits battery-powered systems and vehicle bodies.

Advantages

• Spring-centred position with all ports blocked, switching time 35 ms max at 5 bar.
• Spool and body in aluminium, NBR seals, pilot section in glass fibre reinforced polyamide.
• 22 mm solenoid coil, insulation class F, with 3-pin DIN connector rated IP65.
• Up to 3 Hz switching frequency with a voltage tolerance of -10 to +10 %.

Applications

• Stopping a cylinder in an intermediate position, for positioning or set-up.
• 12 V DC on-board systems in vehicles, trailers and mobile equipment.
• Holding loads when the control signal drops briefly.

Accessories and spare parts

The replacement solenoid coil for 12 V DC is available separately and can be changed without opening the pneumatic circuit. For banks of several valves YPC offers the MF5500 manifold with 2 to 12 stations and a common supply through G 3/8.