5/3-way solenoid valve, centre position pressurised, G 1/8", 230 V AC, 450 l/min, 1.5 to 8 bar, 3 VA

A double-acting actuator needs a valve that switches the air path reliably and delivers the required flow. This 5/3-way solenoid valve with connection G 1/8" passes 450 l/min and is controlled with 230 V AC. The switching function is centre position pressurised. The actuator can therefore be switched straight from the machine control without an extra pilot stage.

Advantages

• Protection class IP 65 at the solenoid coil, suitable for dusty surroundings.
• Temperature range of -5 to +60 °C, which covers use in the machine room as well as outdoors.
• Service life min. 40 million switching cycles, enough for continuous multi-shift operation.
• Connection G 1/8" and exhaust G 1/8", so the piping follows the existing line network.
• Control voltage tolerance plus/minus 10 percent, which makes short supply dips uncritical.

Applications

• Replacement of a defective valve of the same type in existing machines.
• Control of double-acting cylinders with an air demand up to 450 l/min.
• Sequencing of pneumatic axes with connection G 1/8" in handling equipment.
• Installation in control cabinets with a supply of 230 V AC.