5/3-way solenoid valve, closed centre, G 1/4, 590 l/min, 24 V AC - YPC SF4303

In the centre position this 5/3-way valve blocks all ports. With both coils de-energised, a double-acting cylinder stops at whatever intermediate position it has reached. The 24 V AC coil (4.1 VA per coil) fits control circuits fed with safety extra-low voltage from a control transformer. This pilot-operated spool valve from the SF4000 series moves 590 l/min through its G 1/4 ports.

Advantages

• All ports blocked in the centre position, intermediate stops at 2 to 10 bar operating pressure.
• Switching time max. 35 ms at 5 bar, up to 3 Hz switching frequency.
• Runs on non-lubricated air, use ISO VG32 oil if lubricated.
• IP65 with DIN connector, coil insulation class F.
• 590 l/min flow on a 26 mm wide body, easy to mount side by side.

Applications

• Lifting units that should hold the load on emergency stop.
• Setup mode where the actuator is jogged step by step.
• Positioning and intermediate stops of double-acting cylinders.

Accessories and spare parts

A matching 24 V AC replacement coil is available separately, the valve carries two of them. For manifold mounting, YPC offers the MF4500 manifold base in the SF4000 series with 2 to 14 stations and common supply and exhaust ports.