5/3-way solenoid valve, closed centre, G 1/4, 590 l/min, 24 V DC - YPC SF4303

This pilot-operated spool valve from the SF4000 series moves 590 l/min through its G 1/4 ports. In the centre position this 5/3-way valve blocks all ports. With both coils de-energised, a double-acting cylinder stops at whatever intermediate position it has reached. At 24 V DC and 2.1 W per coil, the coil can be switched straight from a PLC output.

Advantages

• All ports blocked in the centre position, intermediate stops at 2 to 10 bar operating pressure.
• IP65 with DIN connector, coil insulation class F.
• Non-polarised, removable coil with 2.1 W power consumption.
• Switching time max. 35 ms at 5 bar, up to 3 Hz switching frequency.
• Runs on non-lubricated air, use ISO VG32 oil if lubricated.

Applications

• Setup mode where the actuator is jogged step by step.
• Positioning and intermediate stops of double-acting cylinders.
• Lifting units that should hold the load on emergency stop.

Accessories and spare parts

A matching 24 V DC replacement coil is available separately, the valve carries two of them. For manifold mounting, YPC offers the MF4500 manifold base in the SF4000 series with 2 to 14 stations and common supply and exhaust ports.