5/2-way solenoid valve, double solenoid, bistable, G 1/8, 620 l/min, 115 V AC - YPC

With two coils, this bistable 5/2-way valve remembers the last position it was switched to. If the control voltage fails, the cylinder stays where it is instead of moving back on its own. With a 115 V AC coil (4.1 VA per coil), the valve runs on the control voltage common in machines built for 115 V mains. The valve moves 620 l/min through its G 1/8 ports and works from 1.5 to 10 bar.

Advantages

• Holds position without power, the coil only draws 4.1 VA for the switching pulse.
• Switching time below 25 ms at 5 bar for short cycle times.
• Aluminium body and spool, NBR seals.
• 620 l/min flow through G 1/8 ports, exhaust G 1/8.
• For lubricated and non-lubricated filtered air from -10 to +60 °C.

Applications

• Cycled operation from pulse outputs without keeping a coil energised.
• Diverters and locks whose position must be retained.
• Clamping fixtures that must stay clamped on power failure.

Accessories and spare parts

A matching 115 V AC replacement coil is available separately, the valve carries two of them.