5/2-way solenoid valve, double solenoid, G 3/8, 2000 l/min, 230 V AC - YPC SF5200

Two coils and no return spring. The YPC SF5200 is switched over by short pulses and then stays in position without power. That saves coil energy in continuous operation and keeps the actuator in place if the mains fails. Flow through G 3/8 is 2000 l/min. The 230 V AC coil draws 4.1 VA and is supplied straight from the mains, so no power supply unit is needed in the cabinet.

Advantages

• Impulse operation: the switched position is held without power, switching time 25 ms max at 5 bar.
• 22 mm solenoid coil, insulation class F, with 3-pin DIN connector rated IP65.
• Up to 5 Hz switching frequency with a voltage tolerance of -10 to +10 %.
• 32 mm valve width keeps valve banks narrow as well.
• Oil-free operation: no lubrication required, if lubricated use ISO VG32 oil.

Applications

• Simple controls switching directly at 230 V AC mains voltage.
• Cycled operation with short switching pulses instead of a permanently energised coil.
• Actuators that must keep their position on power loss, such as flaps and gates.
• Valve banks on the MF5500 manifold with a common supply.

Accessories and spare parts

The replacement solenoid coil for 230 V AC is available separately and can be changed without opening the pneumatic circuit. For banks of several valves YPC offers the MF5500 manifold with 2 to 12 stations and a common supply through G 3/8.