Valve terminal for bus module, 8 x 5/2-way single solenoid, M5 top ports on the valves, 24 V DC - E.MC

On an 11.5 mm pitch this manifold carries 8 valve positions, all fitted with spring-return 5/2-way valves. The terminal is prepared for a bus module, which is not included in the delivery. The M5 ports are located on top of the valves, and supply and common exhaust are connected through G 1/8.

Advantages

• Base with 8 stations without bus module, the matching module for PROFINET, EtherCAT, EtherNet/IP, DeviceNet, CC-Link, PROFIBUS DP or IO-Link is fitted separately.
• M5 ports with a nominal cross-section of 5 mm² (Cv 0.28), around 230 l/min flow per station.
• Response time of 15 ms or less at 5 bar and up to 5 switching cycles per second per valve.
• Only 0.8 W per solenoid at 24 V DC ±10 %, so 8 valves draw 6.4 W in total.
• Service life of at least 40 million cycles, valves with LED status indicator, each replaceable from above.

Applications

• Building a valve manifold whose bus module is already on hand or ordered to match the controller.
• Small cylinders and grippers on thin tubing, for which 230 l/min per station is sufficient.
• Assembly cells with cylinders, grippers and rotary actuators served jointly by 8 valve positions.
• Cabinet or machine mounting with easily accessible tube connections on top of each valve.

Conversion and extension

The valves can be swapped for individually available valves with one or two solenoids or for blanking plates. Stations are counted from the electrical connection.