5/3-way solenoid valve, exhaust centre, G 3/8, 1600 l/min, 12 V DC - YPC SF5403

An actuator that must be free of force at rest needs an exhaust centre. With both coils off, the YPC SF5403 vents both cylinder chambers while the supply port stays blocked. Flow through G 3/8 is 1600 l/min. At 12 V DC and 2.1 W the valve fits battery-powered systems and vehicle bodies.

Advantages

• Spring-centred position with both working lines vented, switching time 35 ms max at 5 bar.
• 22 mm solenoid coil, insulation class F, with 3-pin DIN connector rated IP65.
• Up to 3 Hz switching frequency with a voltage tolerance of -10 to +10 %.
• 32 mm valve width keeps valve banks narrow as well.

Applications

• Cylinders that must be moved by hand without force after an emergency stop.
• 12 V DC on-board systems in vehicles, trailers and mobile equipment.
• Control of pilot-operated check valves that close reliably once the lines are vented.

Accessories and spare parts

The replacement solenoid coil for 12 V DC is available separately and can be changed without opening the pneumatic circuit. For banks of several valves YPC offers the MF5500 manifold with 2 to 12 stations and a common supply through G 3/8.