Valve terminal for bus module, 12 x 5/2-way single solenoid, M7 top ports on the valves, 24 V DC - E.MC

This E.MC S1V series valve terminal combines 12 single-solenoid 5/2-way valves on a common base plate. Supply and exhaust run centrally through G 1/8, while the M7 working ports are located on top of the valves. The terminal is prepared for a bus module, which is not included in the delivery.

Advantages

• Base with 12 stations without bus module, the matching module for PROFINET, EtherCAT, EtherNet/IP, DeviceNet, CC-Link, PROFIBUS DP or IO-Link is fitted separately.
• M7 ports with a nominal cross-section of 7 mm² (Cv 0.39), around 330 l/min flow per station.
• Response time of 15 ms or less at 5 bar and up to 5 switching cycles per second per valve.
• Only 0.8 W per solenoid at 24 V DC ±10 %, so 12 valves draw 9.6 W in total.
• Service life of at least 40 million cycles, valves with LED status indicator, each replaceable from above.

Applications

• Building a valve manifold whose bus module is already on hand or ordered to match the controller.
• Medium-bore cylinders that move briskly with 330 l/min per station.
• Packaging and feeding systems in which 12 actuators are switched from one central manifold.
• Cabinet or machine mounting with easily accessible tube connections on top of each valve.

Conversion and extension

The valves can be swapped for individually available valves with one or two solenoids or for blanking plates. Stations are counted from the electrical connection.