Multi-pin valve terminal SR series, 14 stations, 5/2-way single solenoid, G 1/8", 15-pin D-sub, 24 V DC - E.MC

With 14 stations the terminal is fully built out, which is the maximum the SR series accepts. Over an overall length of 285 mm it carries 14 single-solenoid 5/2-way valves with a common supply and a 15-pin D-sub connection.

Advantages

• 15-pin D-sub multi-pin connection, the COM pin can be used for either positive or negative common.
• Valve stations are numbered upwards from the multi-pin connector, so pin number and station number match.
• Flow rate 500 l/min per station at 2.8 W, nominal cross-section 12 mm² (Cv 0.67).
• LED and protective circuit on every valve, service life of at least 40 million cycles.
• Individual stations can be converted to double-solenoid 5/2-way or 5/3-way valves, each of which occupies 2 stations.

Applications

• Special-purpose machines with many pneumatic axes on one controller
• Central valve manifold in the control cabinet of a production cell
• Systems that need two pressure levels on one terminal using pressure separation

Accessories and spare parts

• Replacement 5/2-way single-solenoid valve, occupies 1 station
• Replacement 5/2-way double-solenoid (impulse) valve, occupies 2 stations
• Replacement 5/3-way valves with closed, exhausted or pressurised centre, each occupying 2 stations
• Pressure separator for running stations at different inlet pressures, needs no extra station