Images are examples, some edited with AI. The technical data are authoritative. AI notice

Manifold sub-base for valve terminal VTUX-A-S VABX-A-S-EL-E12-API-SHUH-XL - Festo 8189593

Festo ✓ Original product Brand new

The manifold sub-base VABX-A-S-EL-E12-API-SHUH-XL from Festo combines supply and exhaust for the mounted valves. Key values: compatible with valve terminal VTUX-A-S, port 1 for 15 mm cartridge and up to 150 valve coils.

Net
€83.38
excl. VAT
Item FES-8189593
Manufacturer no. VABX-A-S-EL-E12-API-SHUH-XL
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

The manifold sub-base VABX-A-S-EL-E12-API-SHUH-XL combines supply and exhaust for the mounted valves. Key values: compatible with valve terminal VTUX-A-S, port 1 for 15 mm cartridge and up to 150 valve coils.

Benefits

  • Compatible with valve terminal VTUX-A-S
  • Port 1 for 15 mm cartridge
  • Up to 150 valve coils
  • Sub-base made of reinforced PA
  • Degree of protection IP65, dust-tight and protected against water jets
  • Corrosion resistance class CRC 2, rated for moderate corrosion stress

Application

A typical use of VABX-A-S-EL-E12-API-SHUH-XL is building compact valve terminals in machine and plant engineering. VABX-A-S-EL-E12-API-SHUH-XL creates a compact valve group with little tubing and fitting effort.

Technical data

Order codeVABX-A-S-EL-E12-API-SHUH-XL
Festo part number8189593
Size1 to 2
Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Position of connectionOn the side
Reverse polarity protectionYes
Diagnostics via LEDDiagnostics per module
Diagnostics per internal communicationLoad supply undervoltage PL, Logic supply undervoltage PS
Valve terminal structureValve sizes can be mixed
Max. number of valve coils150
Module parametersConfiguration of voltage monitoring load supply PL, Behaviour in error state
Compatible withValve terminal VTUX-A-S
Dimensions (W x L x H)45.6 mm x 117.4 mm x 53.9 mm
Fuse protection (short circuit)Internal electronic fuse per channel
Inductive protective circuitIntegrated
Intrinsic current consumption at nominal operating voltage for electronics/sensorsTypical 27 mA
Intrinsic current consumption at nominal operating voltage loadTypical 13 mA
Note regarding operating voltageSELV/PELV fixed power supplies required, Note the voltage drop
Power consumption at 24VDC0.65 W
Max. power supply2 x 4 A (external fuse required)
Nominal DC operating voltage, electronics/sensors24 V
Nominal operating voltage DC of load24 V
Power failure bridging10 ms
Electrical isolation of outputs between channel - internal communicationYes
Potential separation between the supply voltages electronics/sensor technology and load/valvesYes
ProtocolAP
Pollution degree2
Permissible voltage fluctuations for electronics/sensors±25%
Permissible voltage fluctuation of load±10%
Power supply, functionIncoming electronics/sensors and load
Power supply, connection typePlug
Power supply, connection systemM8x1, A-coded to EN 61076-2-104
Power supply, number of pins/wires4
Power transmission, functionOutgoing electronics/sensors and load
Power transmission, connection typeSocket
Power transmission, connection technologyM8x1, A-coded to EN 61076-2-104
Power transmission, number of pins/wires4
Undervoltage load/valves (diagnostic message)21.1 V
ApprovalRCM
KC markKC-EMV
CE mark (see declaration of conformity)To EU EMC Directive, In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK instructions for EMC, To UK RoHS instructions
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Storage temperature-20 to 70 °C
Relative air humidity5 - 95%
Protection against direct and indirect contactPELV, Safety extra-low voltage
Degree of protectionIP65
Note on degree of protectionUnused connections sealed
Overvoltage categoryII
Ambient temperature-5 to 50 °C
Nominal altitude of use≤ 2000 m NHN
Max. installation height3500 m
Max. tightening torque wall mounting6 Nm
Product weight150 g
Electrical controlAP interface
Max. cable length50 M
Communication interface, functionSystem communication XF10 IN / XF20 OUT
Communication interface, connection type2x socket
Communication interface, connection technologyM8x1, D-coded according to EN 61076-2-114
Communication interface, number of pins/cores4
Communication interface, protocolAP
Communication interface, screenedYes
Cable outletStraight
Mounting method for sub-baseWith through-hole
Type of mountingVia through-hole for M5 screw
Pneumatic connection, port 1For 15 mm cartridge
Pneumatic connection, port 5For 15 mm cartridge
Note on materialsRoHS compliant
Material sub-baseReinforced PA
Material coverReinforced PA
Material sealsNBR
Material foilPolyester
Material sleeveHigh-alloy stainless steel
Material clipHigh-alloy stainless steel
Material nutHigh-alloy stainless steel
ManufacturerFesto
Hersteller-NrVABX-A-S-EL-E12-API-SHUH-XL
EAN4052568651473
Zolltarifnummer84819000
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
Seal materialNBR
Operating voltage24 V DC
Protection ratingIP65
Temperature (max.)50

Downloads

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.

Customers Who Bought This Item Also Bought