Images are examples, some edited with AI. The technical data are authoritative. AI notice
Manifold sub-base for vacuum VABX-A-S-VE-BH-VB010L - Festo 8233480
Net
excl. VAT
€225.72
Item
FES-8233480
Manufacturer no.
VABX-A-S-VE-BH-VB010L
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Technical data
| Width | 12.55 mm |
|---|---|
| Length | 150.8 mm |
| Nominal size, Laval nozzle | 0.95 mm |
| Grid dimension | 12.55 mm |
| Valve size | 10 mm |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Silencer design | Open |
| Type of actuation | Electrical |
| Reverse polarity protection | Yes |
| Sealing principle | Soft |
| Mounting position | Any |
| Ejector characteristic | High suction rate |
| Adjustment component | Slotted head screw |
| Diagnostics per internal communication | Switch-off load supply, Electronics/sensors overvoltage, Electronics/sensors undervoltage |
| Measured variable | Relative pressure |
| Measuring principle | Piezoresistive |
| Max. number of valve positions | 1 |
| Integrated function | Ejector pulse, electrical, Ejector pulse valve, electric, Flow control, Pressure sensor, Pressure transmitter, On/off valve, electric, Air-saving function, electric, Check valve, Open silencer, With electrical interlinking module |
| Type of piloting | Piloted |
| Pilot air supply | Internal |
| Valve function | 2x3/2 closed monostable, 5/4-way valve with holding function, for vacuum generator |
| Compatible with | Valve terminal VTUX-A-S |
| Display type | LED |
| Signal status display | Yes |
| Operating pressure for max. suction flow rate | 6 bar |
| Operating pressure | 2 ... 7 bar |
| Nominal operating pressure | 6 bar |
| Pilot pressure | 2 ... 7 bar |
| Max. suction flow rate against atmosphere | 45 l/min |
| Air supply time at nominal operating pressure | 0.42 s |
| Dimensions (W x L x H) | 12.55 mm x 150.8 mm x 68.8 mm |
| Inductive protective circuit | Integrated |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typical 27 mA |
| Intrinsic current consumption at nominal operating voltage load | Typical 2.5 mA |
| Note regarding operating voltage | SELV/PELV fixed power supplies required, Note the voltage drop |
| Power consumption at 24VDC | 0.65 W |
| Nominal DC operating voltage, electronics/sensors | 24 V |
| Nominal operating voltage DC of load | 24 V |
| Power failure bridging | 10 ms |
| Electrical isolation of outputs between channel - internal communication | Yes |
| Potential separation between the supply voltages electronics/sensor technology and load/valves | Yes |
| Permissible voltage fluctuations for electronics/sensors | ±10% |
| Permissible voltage fluctuation of load | ±10% |
| Approval | RCM |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | To EU EMC Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Ester oil < 0.1mg/m³, according to ISO 8573-1:2010 [-:-:2], Lubricated operation not possible |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-C1-L |
| Storage temperature | -20 ... 70 °C |
| Relative air humidity | 5 - 95% |
| Degree of protection | IP65 |
| Note on degree of protection | In mounted state |
| Pilot medium | Compressed air to ISO 8573-1:2010 [7:4:-] |
| Ambient temperature | -5 ... 50 °C |
| Nominal altitude of use | <= 2000 m NHN |
| Max. installation height | 2000 m |
| Product weight | 68 g |
| Pressure measuring range | -1 ... 1 bar |
| Accuracy in ± % FS | 3 %FS |
| Reproducibility of switching values FS | 1 % |
| Electrical control | AP interface |
| Communication interface, protocol | AP-COM |
| Type of mounting | Tie rod |
| Pneumatic connection, port 2 | QS-4, QS-6, QS-8, QS-5/32, QS-1/8, QS-1/4, QS-5/16, For tubing outside diameter of 4 mm, For tubing outside diameter of 6 mm, For tubing outside diameter of 8 mm, For tubing outside diameter of 5/32", For tubing outside diameter of 1/4", For tubing outside diameter of 5/16" |
| Note on materials | RoHS compliant |
| Material sub-base | Reinforced PA |
| Material cover | Reinforced PA |
| Material seals | HNBR, NBR |
| Material receiver nozzle | POM |
| Material foil | Polyester |
| Material housing | Reinforced PA |
| Material sleeve | Reinforced PA |
| Material clip | High-alloy stainless steel |
| Material nut | High-alloy stainless steel |
| Material o-ring | HNBR, NBR |
| Material adjusting screw | Reinforced PA |
| Material silencer | PP, Polyurethane foam |
| Material screws | High-alloy stainless steel |
| Material transmitter nozzle | Wrought aluminium alloy |
| Weight | 0.075 kg |
| Manufacturer | Festo |
| Hersteller-Nr | VABX-A-S-VE-BH-VB010L |
| EAN | 4052568789671 |
| Zolltarifnummer | 84141089 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.
