Images are examples, some edited with AI. The technical data are authoritative. AI notice
Manifold sub-base VABX-A-P-EL-E12-API-SHUH-XL - Festo 8189592
Net
excl. VAT
€127.66
Item
FES-8189592
Manufacturer no.
VABX-A-P-EL-E12-API-SHUH-XL
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Technical data
| Size | 1 ... 2 |
|---|---|
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Communication interface, plug pattern | 00995937 |
| Position of connection | On the side |
| Reverse polarity protection | Yes |
| Diagnostics via LED | Diagnostics per module, Load power supply |
| Diagnostics per internal communication | Switch-off load supply, Electronics/sensors overvoltage, Electronics/sensors undervoltage |
| Valve terminal structure | Valve sizes can be mixed |
| Max. number of valve coils | 32 |
| Module parameters | Configuration of voltage monitoring load supply PL, Behaviour in error state |
| Compatible with | Valve terminal VTUX-A-P |
| Dimensions (W x L x H) | 45.6 mm x 117.4 mm x 53.9 mm |
| Fuse protection (short circuit) | Internal electronic fuse per channel |
| Inductive protective circuit | Integrated |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typical 27 mA |
| Intrinsic current consumption at nominal operating voltage load | Typical 13 mA |
| Note regarding operating voltage | SELV/PELV fixed power supplies required, Note the voltage drop |
| Power consumption at 24VDC | 0.65 W |
| Max. power supply | 2 x 4 A (external fuse required) |
| Nominal DC operating voltage, electronics/sensors | 24 V |
| Nominal operating voltage DC of load | 24 V |
| Power failure bridging | 10 ms |
| Electrical isolation of outputs between channel - internal communication | Yes |
| Potential separation between the supply voltages electronics/sensor technology and load/valves | Yes |
| Protocol | AP |
| Pollution degree | 2 |
| Permissible voltage fluctuations for electronics/sensors | ±25% |
| Permissible voltage fluctuation of load | ±10% |
| Power supply, function | Incoming electronics/sensors and load |
| Power supply, connection type | Plug |
| power supply, connection system | M8x1, A-coded to EN 61076-2-104 |
| Power supply, number of pins/wires | 4 |
| Power supply, connection pattern | 00991171 |
| Power transmission, function | Outgoing electronics/sensors and load |
| Power transmission, connection type | Socket |
| Power transmission, connection technology | M8x1, A-coded to EN 61076-2-104 |
| Power transmission, number of pins/wires | 4 |
| Power transmission, plug pattern | 00991872 |
| Undervoltage load/valves (diagnostic message) | 21.1 V |
| Approval | RCM |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | To EU EMC Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC, To UK RoHS instructions |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Storage temperature | -20 ... 70 °C |
| Relative air humidity | 5 - 95% |
| Protection against direct and indirect contact | PELV, Safety extra-low voltage |
| Degree of protection | IP65 |
| Note on degree of protection | Unused connections sealed |
| Overvoltage category | II |
| Ambient temperature | -20 ... 50 °C |
| Nominal altitude of use | <= 2000 m NHN |
| Max. installation height | 3500 m |
| Max. tightening torque wall mounting | 6 Nm |
| Product weight | 144.8 g |
| Electrical control | AP interface |
| Max. address volume, outputs | 4 byte |
| Max. cable length | 50 M |
| Communication interface, function | System communication XF10 IN / XF20 OUT |
| Communication interface, connection type | 2x socket |
| Communication interface, connection technology | M8x1, D-coded according to EN 61076-2-114 |
| Communication interface, number of pins/cores | 4 |
| Communication interface, protocol | AP-COM |
| Communication interface, screened | Yes |
| Cable outlet | Straight |
| Mounting method for sub-base | With through-hole |
| Type of mounting | Via through-hole for M5 screw |
| Pneumatic connection, port 1 | For 15 mm cartridge |
| Pneumatic connection, port 5 | For 15 mm cartridge |
| Note on materials | RoHS compliant |
| Material sub-base | Reinforced PA |
| Material cover | Reinforced PA |
| Material seals | NBR |
| Material foil | Polyester |
| Material sleeve | High-alloy stainless steel |
| Material clip | High-alloy stainless steel |
| Material nut | High-alloy stainless steel |
| Manufacturer | Festo |
| Hersteller-Nr | VABX-A-P-EL-E12-API-SHUH-XL |
| EAN | 4052568638511 |
| Zolltarifnummer | 84819000 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.
