Pressure Reducing Valve DREME10-6X/315YG24K31F1V - Bosch Rexroth R901433300

A current signal carries the command over long cable runs without losing level. The DREME10-6X/315YG24K31F1V accepts exactly that signal, 4...20 mA, and sets the reduced pressure in the secondary circuit, at up to 300 l/min throughput and 315 bar operating pressure.

Advantages

• Command as a 4...20 mA current signal, insensitive to voltage drop on long cables.
• Up to 300 l/min throughput in the B to A path, two switching positions across three ports.
• On-board electronics inside the body, no external amplifier required, UKCA declared to SI2016/1091.
• Maximum operating pressure 315 bar on the ISO 5781 pattern in size 10.
• 24 VDC supply voltage, electrical link Connector 7-pole (6 + PE) according to EN 175201-804.
• FKM seals for HL grade fluid, 5 kg mass.

Applications

The unit is used where clamping, holding or preload circuits need their own pressure level, for example on presses and machine tools. On-board electronics take the command straight from the controller. The connection pattern follows ISO 5781 in size 10.

Manufacturer

Bosch Rexroth, material number R901433300. Characteristic curves, dimensions and limits are given in data sheet RE 29276.