Pressure Reducing Valve DREM10-6X/200YMG24K4V - Bosch Rexroth R901452521

Clamping and pressing circuits often need the pressure changed during the cycle, and a fixed setting is not enough. The DREM10-6X/200YMG24K4V reduces the pressure continuously to an electrical command value while passing up to 300 l/min.

Advantages

• Electrical actuation with external electronics makes the reduced pressure follow the command value from the machine controller directly.
• Maximum operating pressure of 315 bar at a flow of up to 300 l/min in size 10.
• Pressure reduction from B to A across three ports, suited to branched part circuits.
• FKM seals prepare the valve for higher oil temperatures.
• Connection diagram to ISO 5781 and a weight of 1.4 kg allow the valve to be added to existing control manifolds.

Application

Typical uses are clamping fixtures, presses and test rigs where the pressure changes several times during a cycle. The valve mounts on a subplate to ISO 5781 and is driven by external amplifier electronics. The solenoid runs on 24 VDC.

Manufacturer

Bosch Rexroth lists the valve under material number R901452521. Detailed characteristic curves and installation dimensions are given in the data sheet Proportional pressure reducing (RE 29276), Hydraulic valves and hydro- (RE 07600-B).