Pressure Reducing Valve DREME20-6X/100YMG24K31A1M - Bosch Rexroth R901298574

A clamping circuit below 100 bar still has to take the full flow of the plant. The DREME20-6X/100YMG24K31A1M controls up to 100 bar and lets up to 300 l/min pass, guided by a 0 to 10 V setpoint.

Benefits

• Control band up to 100 bar at 300 l/min flow, so low pressure without throttling the volume.
• Analogue setpoint 0 to 10 V on the on-board electronics, supply 24 VDC.
• 315 bar permitted inlet pressure, size 25, connection pattern to ISO 5781.
• Spool symbol B to A, three ports, two switching positions, subplate mounting.
• NBR seals, HL hydraulic fluid, 6.28 kg, 7-pole connector (6 + PE) to EN 175201-804.

Applications

The valve is used on clamping and feeding units that travel quickly while needing only moderate pressure. The analogue setpoint allows switching between rapid traverse and holding force. When replacing a unit, check the control band and the signal type together.

Manufacturer

Bosch Rexroth, material number R901298574. Characteristic curves, port dimensions and control details are given in the valve data sheet.