Pressure Reducing Valve DREME10-6X/100YMG24K31A1M - Bosch Rexroth R901310680

If the controller has an analog 0...10 V output, the valve can be wired to it directly. The DREME10-6X/100YMG24K31A1M controls the 100 bar pressure stage from that signal and lets up to 300 l/min through to the actuator.

Benefits

• 0...10 V command straight from the controller, no extra signal converter needed
• 100 bar pressure stage in a system rated 315 bar maximum operating pressure
• Up to 300 l/min across three ports, ISO 5781 interface, spool symbol B to A
• On-board electronics at 24 VDC, 7-pole (6 + PE) plug to EN 175201-804
• 4.98 kg, NBR seals and HL hydraulic fluid

Applications

The valve supplies clamping fixtures, counterholders and tool circuits that must stay well below system pressure. It fits any size 10 subplate to ISO 5781. On plants that already provide a voltage command, wiring is finished with the plug.

Manufacturer

Bosch Rexroth, material number R901310680. Characteristic curves and installation dimensions are given in data sheet RE 29276.