Pressure Reducing Valve DREME10-6X/200YMG24K31A1V - Bosch Rexroth R901289455

Where the command value arrives as a voltage from an analog card, the DREME10-6X/200YMG24K31A1V works without a signal converter. It turns 0...10 V into a controlled pressure, in size 10, with FKM seals and 5 kg.

Benefits

• Reduced pressure follows the 0...10 V signal issued by the machine controller.
• Connection diagram ISO 5781 in size 10, exchangeable without repiping.
• Flow up to 300 l/min at a maximum operating pressure of 315 bar.
• FKM seals, hydraulic fluid HL, 5 kg.
• 7-pole connector (6 + PE) to EN 175201-804, 24 V DC supply.

Applications

The valve goes wherever a partial function needs less pressure than the main circuit delivers, for example feed and holding steps. The amplifier handles the command value on the valve itself, so no module in the control cabinet is required.

Manufacturer

The manufacturer is Bosch Rexroth, material number R901289455. Characteristic curves, installation dimensions and tightening torques are in data sheet RE 29276.