Pressure Reducing Valve 3DREME10P-7X/50YG24K31A1V - Bosch Rexroth R901293211

A slider on the operator panel is the simplest way to set a pressure and needs no more than an analogue output. The 3DREME10P-7X/50Y build processes the command value as a 0...10 V voltage and holds the pressure from P to A accordingly. The pilot drain runs externally, and up to 300 l/min maximum flow at 315 bar operating pressure is permitted.

Benefits

• 0...10 V command value, driven straight from an analogue output or a setpoint generator
• Pressure reduction from P to A with an external pilot oil drain
• Up to 300 l/min maximum flow in size 10
• Operating pressure up to 315 bar, hole pattern ISO 4401-05-05-0-05, four ports
• FKM seals for HL hydraulic fluid, 7.5 kg unit weight
• On-board electronics, 24 VDC supply, 7-pole connector (6 + PE) to EN 175201-804

Technical data

Application

The voltage variant makes sense on machines whose operators adjust the pressure themselves during set-up, for instance at test stations, assembly fixtures and small power units. Without a burden resistor the command can be wired directly. For valve blocks far from the cabinet a 4...20 mA build remains the better match.

Manufacturer

Bosch Rexroth lists this valve under material number R901293211.