Pressure Reducing Valve DREME10-6X/100YG24K31A1M - Bosch Rexroth R901289452

A tooling circuit around 100 bar on a control system with a voltage output needs no extra interface. The DREME10-6X/100YG24K31A1M regulates on the 100 bar rating from a 0...10 V command value, carrying up to 300 l/min.

Benefits

• 100 bar pressure rating, 0...10 V command value with no signal converter
• Maximum flow 300 l/min, maximum operating pressure 315 bar
• Subplate mounting to ISO 5781 in size 10, 3 ports
• Spool symbol B to A, 2 switching positions
• On-board electronics at 24 VDC, 7-pole connector (6 + PE) to EN 175201-804
• NBR seals, weight 4.95 kg, UKCA conformity

Application

Duties are tooling branches, feed branches, infeed units as well as pinch rolls in the range around 100 bar. Because pressure comes from the control system, it can be changed per batch as well as recorded. Weight 4.95 kg, HL hydraulic fluid.

Manufacturer

Bosch Rexroth, material number R901289452, type designation DREME10-6X/100YG24K31A1M. Further values are given in the data sheet Proportional pressure reducing (RE 29276) and Hydraulic valves and hydro- (RE 07600-B).