Pressure Reducing Valve DREME10-6X/200YMG24K31F1M - Bosch Rexroth R901328652

Where a branch circuit runs permanently at about 200 bar while the pump delivers up to 315 bar, the DREME10-6X/200YMG24K31F1M does the separation. The 4...20 mA current command sets the reduced pressure, throughput reaches 300 l/min.

Benefits

• 200 bar pressure stage for clamping and tool circuits below the 315 bar maximum operating pressure
• 4...20 mA command signal, suited to long cable runs between controller and valve
• Up to 300 l/min flow on the ISO 5781 interface in size 10
• On-board electronics, supplied at 24 VDC through a 7-pole (6 + PE) plug to EN 175201-804
• 4.96 kg weight, NBR seals, HL hydraulic fluid, spool symbol B to A

Applications

The valve serves clamping circuits of machine tools, feed axes and press side circuits that need a pressure of their own. Three ports and the ISO 5781 interface fit standard subplates of size 10. The reduced pressure can be retuned from the controller during operation.

Manufacturer

Bosch Rexroth, material number R901328652. Characteristic curves, hysteresis and mounting dimensions are given in data sheet RE 29276.