Pressure Reducing Valve 3DREME10P-7X/100XYG24K31A1V - Bosch Rexroth R901256689

To run in a circuit, an adjustable voltage source is often enough to test the valve before the controller is finished. The 3DREME10P-7X/100XY build takes the command value as 0...10 V and reduces the pressure from P to A. With up to 300 l/min maximum flow and 315 bar operating pressure it also covers larger branches in size 10.

Benefits

• 0...10 V command value, testable at commissioning with an adjustable voltage source
• Pressure reduction from P to A, two switching positions, four ports
• Up to 300 l/min maximum flow in size 10
• Operating pressure up to 315 bar, hole pattern ISO 4401-05-05-0-05
• FKM seals for HL hydraulic fluid, 8.1 kg unit weight
• On-board electronics, 24 VDC supply, 7-pole connector (6 + PE) to EN 175201-804

Application

The valve is wanted in branches of control blocks on machine tools, test rigs and special purpose machines that are run in individually before delivery. A voltage command can be applied during the acceptance run without extra converters. The complete build appears in the type designation 3DREME10P-7X/100XYG24K31A1V.

Manufacturer

Bosch Rexroth lists this valve under material number R901256689.