Pressure Reducing Valve DREE10-6X/315YG24K31F1M - Bosch Rexroth R901289406

In steelworks and press lines there are often many metres of cable between controller and valve. The DREE10-6X/315YG24K31F1M therefore takes a 4...20 mA current command and covers the 315 bar pressure stage at up to 300 l/min.

Benefits

• 4...20 mA current command for long cable runs across the plant
• 315 bar pressure stage, equal to the maximum operating pressure of the valve
• Up to 300 l/min flow, three ports, spool symbol B to A
• On-board electronics at 24 VDC, 7-pole (6 + PE) plug to EN 175201-804
• 4.84 kg, NBR seals, HL hydraulic fluid, ISO 5781 interface

Applications

The valve is used in rolling mills, press lines and test rigs whose cabinet stands far away. The reduced pressure can be set across the whole range without mechanical readjustment. Size 10 and the ISO 5781 hole pattern match the DRE(M)(E)10 series.

Manufacturer

Bosch Rexroth, material number R901289406. Characteristic curves, hysteresis and installation dimensions are given in data sheet RE 29276.