Pressure Reducing Valve DREME10-6X/200YG24K31A1V - Bosch Rexroth R901424460

Voltage commands are the normal case in many installed controllers. The DREME10-6X/200YG24K31A1V accepts 0...10 V and turns it into a steady reduced pressure, at up to 300 l/min and an operating pressure of 315 bar.

Advantages

• 0...10 V command, directly compatible with common analogue controller outputs.
• Up to 300 l/min in the B to A path, two switching positions across three ports in size 10.
• Control electronics built into the body, wiring through a single plug, UKCA to SI2016/1091.
• 315 bar operating pressure on connection diagram ISO 5781 of size 10.
• 24 VDC supply, wiring per Connector 7-pole (6 + PE) according to EN 175201-804.
• HL grade fluid with FKM seals, 0.1 kg mass.

Applications

The unit supplies preload and holding circuits on presses, test rigs and machine tools with their own adjustable pressure level. Its voltage interface suits older analogue cards without a current output. The hole pattern follows ISO 5781.

Manufacturer

Bosch Rexroth lists this item under material number R901424460. Curves and dimensions are documented in data sheet RE 29276.