PVC-U ball valve, pneumatic actuator, DN 100, spring opening, female thread, EPDM seal

The ball valve shuts off water and neutral liquids with a PVC-U body and a pneumatic quarter-turn actuator. This version is listed with nominal size DN 100, connection thread Rp 4" and installation length 284 mm. Its rating is a flow rate of 10000 l/min. The version is listed with a spring opening actuator and the connection female thread, EPDM seal.

Benefits

• Nominal size DN 100 with a flow rate of 10000 l/min.
• Nominal pressure 0 - 16 bar, the ball valve works from 0 to +60 °C.
• Installation length 284 mm, PVC-U body with a PTFE ball seat.
• Quarter-turn actuator spring opening with a control pressure of 6 to 10 bar.
• Connection female thread, EPDM seal on the ball valve.
• Actuator housing in anodised aluminium with NBR seals, temperature range -20 to +80 °C.

Applications

In industry the valve of 284 mm installation length and the connection female thread, EPDM seal is fitted into the line.

Standards and conformity

The actuators carry an ATEX marking for equipment groups 2G and 2D. The ball valve is rated for 0 to +60 °C.