PVC-U ball valve, pneumatic actuator, DN 50, spring closing, solvent socket, EPDM seal

The ball valve shuts off water and neutral liquids with a PVC-U body and a pneumatic quarter-turn actuator. This version is listed with nominal size DN 50, solvent socket of 63 mm inside diameter and installation length 172 mm. Its rating is a flow rate of 3200 l/min. The version is listed with a spring closing actuator and the connection solvent socket, EPDM seal.

Benefits

• Nominal size DN 50 with a flow rate of 3200 l/min.
• Nominal pressure 0 - 16 bar, the ball valve works from 0 to +60 °C.
• Installation length 172 mm, PVC-U body with a PTFE ball seat.
• Quarter-turn actuator spring closing with a control pressure of 6 to 10 bar.
• Connection solvent socket, EPDM seal on the ball valve.
• Actuator housing in anodised aluminium with NBR seals, temperature range -20 to +80 °C.

Applications

In industry the valve of 172 mm installation length and the connection solvent socket, EPDM seal is fitted into the line.

Standards and conformity

The actuators carry an ATEX marking for equipment groups 2G and 2D. The ball valve is rated for 0 to +60 °C.