PVC-U ball valve, pneumatic actuator, DN 65, spring opening, female thread, EPDM seal

In use, the ball valve shuts off water and neutral liquids with a PVC-U body and a pneumatic quarter-turn actuator. The data also state a nominal pressure range of 0 - 16 bar. Its rating is a flow rate of 5000 l/min. In addition the data give a spring opening actuator and the connection female thread, EPDM seal.

Benefits

• Nominal size DN 65 with a flow rate of 5000 l/min.
• Nominal pressure 0 - 16 bar, the ball valve works from 0 to +60 °C.
• Installation length 229 mm, PVC-U body with a PTFE ball seat.
• Quarter-turn actuator spring opening with a control pressure of 6 to 10 bar.
• Connection female thread, EPDM seal on the ball valve.
• Actuator housing in anodised aluminium with NBR seals, temperature range -20 to +80 °C.

Applications

In industry the valve of 229 mm installation length and the connection female thread, EPDM seal is fitted into the line.

Standards and conformity

The actuators carry an ATEX marking for equipment groups 2G and 2D. The ball valve is rated for 0 to +60 °C.