PVC-U ball valve, pneumatic actuator, DN 65, double acting, female thread, FKM seal

Once installed, the ball valve shuts off water and neutral liquids with a PVC-U body and a pneumatic quarter-turn actuator. It is supplied with nominal size DN 65, connection thread Rp 2-1/2" and installation length 229 mm. It is produced from PVC-U. In addition the data give a double acting actuator and the connection female thread, FKM seal.

Benefits

• Nominal size DN 65 with a flow rate of 5000 l/min.
• Nominal pressure 0 - 16 bar, the ball valve works from 0 to +60 °C.
• Installation length 229 mm, PVC-U body with a PTFE ball seat.
• Quarter-turn actuator double acting with a control pressure of 6 to 10 bar.
• Connection female thread, FKM seal on the ball valve.
• Actuator housing in anodised aluminium with NBR seals, temperature range -20 to +80 °C.

Applications

In industry the valve of 229 mm installation length and the connection female thread, FKM seal is fitted into the line.

Standards and conformity

The actuators carry an ATEX marking for equipment groups 2G and 2D. The ball valve is rated for 0 to +60 °C.