PVC-U ball valve, pneumatic actuator, DN 20, spring opening, solvent socket, FKM seal

The ball valve shuts off water and neutral liquids with a PVC-U body and a pneumatic quarter-turn actuator. This version is listed with nominal size DN 20, solvent socket of 25 mm inside diameter and installation length 92 mm. Its rating is a flow rate of 380 l/min. The version is listed with a spring opening actuator and the connection solvent socket, FKM seal.

Benefits

• Nominal size DN 20 with a flow rate of 380 l/min.
• Nominal pressure 0 - 16 bar, the ball valve works from 0 to +60 °C.
• Installation length 92 mm, PVC-U body with a PTFE ball seat.
• Quarter-turn actuator spring opening with a control pressure of 6 to 10 bar.
• Connection solvent socket, FKM seal on the ball valve.
• Actuator housing in anodised aluminium with NBR seals, temperature range -20 to +80 °C.

Applications

In industry the valve of 92 mm installation length and the connection solvent socket, FKM seal is fitted into the line.

Standards and conformity

The actuators carry an ATEX marking for equipment groups 2G and 2D. The ball valve is rated for 0 to +60 °C.