PVC-U ball valve, pneumatic actuator, DN 65, spring closing, female thread, FKM seal

Once installed, the ball valve shuts off water and neutral liquids with a PVC-U body and a pneumatic quarter-turn actuator. It is supplied with nominal size DN 65, connection thread Rp 2-1/2" and installation length 229 mm. The article is made of PVC-U. The version is listed with a spring closing actuator and the connection female thread, FKM seal.

Benefits

• Nominal size DN 65 with a flow rate of 5000 l/min.
• Nominal pressure 0 - 16 bar, the ball valve works from 0 to +60 °C.
• Installation length 229 mm, PVC-U body with a PTFE ball seat.
• Quarter-turn actuator spring closing with a control pressure of 6 to 10 bar.
• Connection female thread, FKM seal on the ball valve.
• Actuator housing in anodised aluminium with NBR seals, temperature range -20 to +80 °C.

Applications

In water supply the spring closing actuator does the switching at a nominal pressure of 0 - 16 bar.

Standards and conformity

The actuators carry an ATEX marking for equipment groups 2G and 2D. The ball valve is rated for 0 to +60 °C.