PVC-U ball valve, pneumatic actuator, DN 50, spring closing, solvent socket, FKM seal

The ball valve shuts off water and neutral liquids with a PVC-U body and a pneumatic quarter-turn actuator. The stated material is PVC-U. The data sheet gives a flow rate of 3200 l/min. This version is supplied with a spring closing actuator and the connection solvent socket, FKM seal.

Benefits

• Nominal size DN 50 with a flow rate of 3200 l/min.
• Nominal pressure 0 - 16 bar, the ball valve works from 0 to +60 °C.
• Installation length 172 mm, PVC-U body with a PTFE ball seat.
• Quarter-turn actuator spring closing with a control pressure of 6 to 10 bar.
• Connection solvent socket, FKM seal on the ball valve.
• Actuator housing in anodised aluminium with NBR seals, temperature range -20 to +80 °C.

Applications

In water treatment the DN 50 valve shuts off a line carrying 3200 l/min.

Standards and conformity

The quarter-turn actuator carries an ATEX marking for equipment groups 2G and 2D. The control pressure is 6 to 10 bar.