PVC-U ball valve, pneumatic actuator, DN 100, double acting, solvent socket, FKM seal

In use, the ball valve shuts off water and neutral liquids with a PVC-U body and a pneumatic quarter-turn actuator. It is supplied with nominal size DN 100, solvent socket of 110 mm inside diameter and installation length 284 mm. It is produced from PVC-U. In addition the data give a double acting actuator and the connection solvent socket, FKM seal.

Benefits

• Nominal size DN 100 with a flow rate of 10000 l/min.
• Nominal pressure 0 - 16 bar, the ball valve works from 0 to +60 °C.
• Installation length 284 mm, PVC-U body with a PTFE ball seat.
• Quarter-turn actuator double acting with a control pressure of 6 to 10 bar.
• Connection solvent socket, FKM seal on the ball valve.
• Actuator housing in anodised aluminium with NBR seals, temperature range -20 to +80 °C.

Applications

In water supply the double acting actuator does the switching at a nominal pressure of 0 - 16 bar.

Standards and conformity

The actuators carry an ATEX marking for equipment groups 2G and 2D. The ball valve is rated for 0 to +60 °C.