PVC-U ball valve, pneumatic actuator, DN 65, double acting, solvent socket, EPDM seal

Once installed, the ball valve shuts off water and neutral liquids with a PVC-U body and a pneumatic quarter-turn actuator. This version comes with nominal size DN 65, solvent socket of 75 mm inside diameter and installation length 229 mm. It is complemented by a nominal pressure range of 0 - 16 bar. Also stated are a double acting actuator and the connection solvent socket, EPDM seal.

Benefits

• Nominal size DN 65 with a flow rate of 5000 l/min.
• Nominal pressure 0 - 16 bar, the ball valve works from 0 to +60 °C.
• Installation length 229 mm, PVC-U body with a PTFE ball seat.
• Quarter-turn actuator double acting with a control pressure of 6 to 10 bar.
• Connection solvent socket, EPDM seal on the ball valve.
• Actuator housing in anodised aluminium with NBR seals, temperature range -20 to +80 °C.

Applications

In water treatment the DN 65 valve shuts off a line carrying 5000 l/min.

Standards and conformity

The quarter-turn actuator carries an ATEX marking for equipment groups 2G and 2D. The control pressure is 6 to 10 bar.