Multi-pin valve terminal SR series, 4 stations, 5/2-way single solenoid, G 1/8", 15-pin D-sub, 24 V DC - E.MC

For small machine modules with only a few actuators, this valve terminal combines 4 valves in an overall length of 95 mm. A single 15-pin D-sub connector takes the place of 4 separate cables.

Advantages

• 15-pin D-sub multi-pin connection, the COM pin can be used for either positive or negative common.
• Valve stations are numbered upwards from the multi-pin connector, so pin number and station number match.
• Flow rate 500 l/min per station at 2.8 W, nominal cross-section 12 mm² (Cv 0.67).
• Individual stations can be converted to double-solenoid 5/2-way or 5/3-way valves, each of which occupies 2 stations.
• LED and protective circuit on every valve, service life of at least 40 million cycles.

Applications

• Small machine modules and fixtures with a few double-acting cylinders
• Test and assembly stations where the terminal sits directly on the fixture
• Replacing an existing multi-pin terminal of the same size

Accessories and spare parts

• Replacement 5/2-way single-solenoid valve, occupies 1 station
• Replacement 5/2-way double-solenoid (impulse) valve, occupies 2 stations
• Replacement 5/3-way valves with closed, exhausted or pressurised centre, each occupying 2 stations
• Pressure separator for running stations at different inlet pressures, needs no extra station