Compressed Air Preparation
Condensate Drain
Condensate drains discharge the condensate collected in filters, water separators and receivers from the compressed air system. The category covers fully automatic drains: electrically controlled PWEA-AC condensate drains with G 1/2 port for 24 V DC, 115 V AC or 230 V AC and mechanically operated WA drains with M9 port.
MS-LWS water separators, which remove liquid water at the inlet of the preparation line, are listed under filters.
- 5 items
- 1 manufacturer
- Net prices plus VAT
Buying guide
How to choose Condensate Drain
What matters when choosing: properties, comparison and typical applications.
Selection criteria
| Criterion | Options | What to look for |
|---|---|---|
| Actuation | electric (PWEA-AC), mechanical (WA) | Electric drains for receivers and collection points with a lot of condensate, mechanical ones directly on the filter bowl. |
| Port | G 1/2, M9 | M9 for mounting on filter bowls, G 1/2 for lines and receivers. |
| Voltage | 24 V DC, 115 V AC, 230 V AC | Match the voltage to the local supply. |
| Operating pressure | up to 16 bar | Check the operating pressure of the system in the data sheet. |
Frequently asked questions
- Mechanical or electric condensate drain?
- Mechanical WA drains open via a float as soon as condensate collects and need no power. Electric PWEA-AC drains suit larger amounts of condensate and collection points in the line.
- Where are condensate drains installed?
- At the lowest points of the system, on filters, water separators and air receivers, where the water collects.
- Where can I find water separators?
- MS-LWS water separators belong to the filter stage and are listed in the filter category.


