Adjustable T connector, tube 20 S, zinc-plated steel, no nut or ring

The adjustable T connector branches a second line off a tube stud and takes the tube through a cutting ring. This version comes with tube stud 20 S and tube connection 20 S (M30x2). A further figure is a temperature range of -40 to +120 °C. This version is supplied with heavy series and scope of delivery without nut and cutting ring.

Benefits

• The branch can point in any direction before it is locked, so tube 20 S (M30x2) can be laid without rework.
• Tube stud 20 S and tube connection 20 S (M30x2) in the same size.
• Working pressure up to 400 bar in the heavy series.
• Temperature range -40 to +120 °C for the body in zinc-plated steel.
• When tightened the cutting ring bites into the tube, so no extra seal is needed.

Applications

When extending an existing line of the heavy series the tube routing is kept because the branch can be adjusted.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.