Adjustable T connector, tube 8 S, stainless steel 1.4571, no nut or ring

Once installed, the adjustable T connector branches a second line off a tube stud and takes the tube through a cutting ring. Material stainless steel 1.4571 is listed for this version. The data state a working pressure of 630 bar. Also stated are heavy series and scope of delivery without nut and cutting ring.

Benefits

• The branch can point in any direction before it is locked, so tube 8 S (M16x1,5) can be laid without rework.
• Tube stud 8 S and tube connection 8 S (M16x1,5) in the same size.
• Working pressure up to 630 bar in the heavy series.
• Temperature range -60 to +400 °C for the body in stainless steel 1.4571.
• When tightened the cutting ring bites into the tube, so no extra seal is needed.

Applications

When extending an existing line of the heavy series the tube routing is kept because the branch can be adjusted.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.