Adjustable T connector, tube 22 L, stainless steel 1.4571, no nut or ring

Once installed, the adjustable T connector branches a second line off a tube stud and takes the tube through a cutting ring. It is produced from stainless steel 1.4571. The data give tube stud 22 L and tube connection 22 L (M30x2). In addition the data give light series and scope of delivery without nut and cutting ring.

Benefits

• The branch can point in any direction before it is locked, so tube 22 L (M30x2) can be laid without rework.
• Tube stud 22 L and tube connection 22 L (M30x2) in the same size.
• Working pressure up to 160 bar in the light series.
• Temperature range -60 to +400 °C for the body in stainless steel 1.4571.
• When tightened the cutting ring bites into the tube, so no extra seal is needed.

Technical data

Applications

At tube stud 22 L of a plant in stainless steel 1.4571 this creates a test or measuring point.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.