Adjustable T connector, tube 18 L, zinc-plated steel, no nut or ring

This adjustable T connector branches a second line off a tube stud and takes the tube through a cutting ring. The data state a working pressure of 315 bar. The stated material is zinc-plated steel. This version is supplied with light series and scope of delivery without nut and cutting ring.

Benefits

• The branch can point in any direction before it is locked, so tube 18 L (M26x1,5) can be laid without rework.
• Tube stud 18 L and tube connection 18 L (M26x1,5) in the same size.
• Working pressure up to 315 bar in the light series.
• Temperature range -40 to +120 °C for the body in zinc-plated steel.
• When tightened the cutting ring bites into the tube, so no extra seal is needed.

Applications

When extending an existing line of the light series the tube routing is kept because the branch can be adjusted.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.