Adjustable T connector, tube 35 L, stainless steel 1.4571, light series

In use, the adjustable T connector branches a second line off a tube stud and takes the tube through a cutting ring. This version is listed with tube stud 35 L and tube connection 35 L (M45x2). Its rating is a working pressure of 160 bar. In addition the data give light series.

Benefits

• The branch can point in any direction before it is locked, so tube 35 L (M45x2) can be laid without rework.
• Tube stud 35 L and tube connection 35 L (M45x2) in the same size.
• Working pressure up to 160 bar in the light series.
• Temperature range -60 to +400 °C for the body in stainless steel 1.4571.
• When tightened the cutting ring bites into the tube, so no extra seal is needed.

Applications

When extending an existing line of the light series the tube routing is kept because the branch can be adjusted.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.