Adjustable T connector with cone, tube 10 L, zinc-plated steel, no nut or ring

In use, the adjustable T connector splits a line into two paths and joins the tube to a tube stud with a sealing cone and an O-ring. It is produced from zinc-plated steel. The data give tube stud 10 L and tube connection 10 L (M16x1.5). In addition the data give light series and scope of delivery without nut and cutting ring.

Benefits

• The tee branches the line off without needing a second port on the device.
• The branch can be set to any direction before it is locked, so tube 10 L (M16x1,5) stays free of stress.
• Sealing cone with an O-ring at tube stud 10 L for a soft joint that can be undone repeatedly.
• Working pressure up to 315 bar in the light series.
• Temperature range -35 to +100 °C for the body in zinc-plated steel.

Applications

When splitting a flow between two consumers the version in zinc-plated steel holds 315 bar on both paths.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.