Adjustable male stud elbow, G 1/4", tube 8 S, zinc-plated steel, no nut or ring

The adjustable male stud elbow leads a precision tube out of a parallel G thread at a right angle and holds it with a cutting ring. This version is listed with male stud thread G 1/4" and tube connection 8 S (M16x1.5). Its rating is a working pressure of 630 bar. The version is listed with heavy series and scope of delivery without nut and cutting ring.

Benefits

• The elbow can be set and is then counter-locked, so tube 8 S (M16x1,5) stays free of stress.
• Parallel male stud thread G 1/4" with an elastomer seal, so the stud end seals without hemp or adhesive.
• Working pressure up to 630 bar in the heavy series.
• Temperature range -35 to +100 °C, limited by the elastomer seal at the body in zinc-plated steel.
• Tube connection 8 S (M16x1,5) through a cutting ring, held by both form and friction.

Applications

For maintenance on a line of the heavy series only the union nut is undone and the stud thread stays in place.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.