Adjustable male stud elbow, G 1/4", tube 8 S, stainless steel 1.4571

Once installed, the adjustable male stud elbow leads a precision tube out of a parallel G thread at a right angle and holds it with a cutting ring. Material stainless steel 1.4571 is listed for this version. The data state a working pressure of 630 bar. Also stated are heavy series.

Benefits

• The elbow can be set and is then counter-locked, so tube 8 S (M16x1,5) stays free of stress.
• Parallel male stud thread G 1/4" with an elastomer seal, so the stud end seals without hemp or adhesive.
• Working pressure up to 630 bar in the heavy series.
• Temperature range -20 to +200 °C, limited by the elastomer seal at the body in stainless steel 1.4571.
• Tube connection 8 S (M16x1,5) through a cutting ring, held by both form and friction.

Applications

For maintenance on a line of the heavy series only the union nut is undone and the stud thread stays in place.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.