Adjustable L connector, tube 42 L, stainless steel 1.4571, no nut or ring

The adjustable L connector turns a precision tube through 90 degrees and joins it to a tube stud with a sealing cone and an O-ring. In addition the sheet lists a temperature range of -20 to +200 °C. The stated figure is a working pressure of 160 bar. The version is listed with light series and scope of delivery without nut and cutting ring.

Benefits

• The elbow can be set to any direction before it is locked, so tube 42 L (M52x2) stays free of stress.
• Sealing cone with an O-ring at tube stud 42 L, so the joint seals softly and can be undone repeatedly.
• Working pressure up to 160 bar in the light series.
• Temperature range -20 to +200 °C, the limit is set by the O-ring and not by the body in stainless steel 1.4571.
• Tube connection 42 L (M52x2) through a cutting ring, the tube is held by both form and friction.

Technical data

Applications

In a control cabinet or power unit in stainless steel 1.4571 the adjustable corner saves the tube bend that would otherwise be needed and holds 160 bar.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.